9.00 9.00 10.80 5 5 5 0.900 0.900 0.900 19.33 19.33 20.56 Max. ± 0.10% Max. ± 0.10% Max. ± 4.0% Max. ± 0.10% Max. ± 0.10% Max. ± 0.20% Max. ± 0.20% Min 95% free from visible defects Max - 3.5 % 0.006 mm/m Max ≤9X10¯6 K¯1 10 Cycle Min ≥ 1400 N Average Min -32 N/mm² Individual min - 30 N/mm² Min Class AA Min Class 1 Min. 4 cycles @ 7.5 bar Min Class -IV Min 5 0.78 Min 100 Cycle Passed Cd - <1 ppm , Pb - 52 ppm Max. ± 5.0% Max. ± 0.10% Max. ± 0.10% Max. ± 0.50% Max. ± 0.50% Min 95% free from visible defects 3%<Average≤6 % 0.03 mm / m Max ≤9X10¯6 K¯1 10 Cycle Min ≥ 1000 N Min Class AA Min Class 1 Min. 4 cycles @ 7.5 bar Class II Min Min 4 0.55 Min NA Required , if agreed to between manufacturer and purchaser ISO 10545-2/ IS 13630 Part 1 ISO 10545-2 / IS 13630 Part 1 ISO 10545-2 / IS 13630 Part 1 ISO 10545-2 / IS 13630 Part 1 ISO 10545-2/ IS 13630 Part 1 ISO 10545-2 / IS 13630 Part 1 ISO 10545-2 / IS 13630 Part 1 ISO 10545- 3 / IS 13630 Part 2 ISO 10545-10 / IS 13630 Part 3 ISO 10545-8 / IS 13630 Part 4 ISO 10545-9/ IS 13630 Part 5 ISO 10545-4/IS 13630 Part 6 ISO 10545-4 / IS 13630 Part 6 ISO 10545- 13 /IS 13630 Part 8 ISO 10545-14 / IS 13630 Part 8 ISO 10545-11 / IS 13630 Part 9 ISO 10545-7 / IS 13630 Part 11 IS 13630 Part 13 ISO 10545-5 / IS 13630 Part 14 ISO 10545-12/ IS 13630 Part 10 ISO 10545-15 Max. ±0.30% Max. ± 5.0% Max. ±0.30% Max. ±0.30% Max. ± 0.40% Max. ± 0.40% Min 95% free from visible defects 3%<Average≤6% Test Method Available Test Method Available Test Method Available ≥ 1000 N Average Min -22 N/mm² Individual min - 20 N/mm² Average Min -22 N/mm² Individual min - 20 N/mm² Min Class B Min Class 3 Required Report Abrasion Class And cycle passed NA Test Method Available Test Method Available Test Method Available Standard Test Method ISO Standard 13006:2018 S.No. IS 15622 :2017 Kajaria Standard 1 Deviation in length & Width Test Description 2 Deviation in Thickness Deviation in Straightness of Sides 3 4 Deviation in Rectangularity 5 Surface Flatness (Center& Edge curvature) 6 Warpage 7 Surface Quality 8 Water Absorption 9 Moisture Expansion 10 Linear Termal Expansion 11 Thermal Shock Resistance 12 Breaking Strength 13 Modulus of Rupture 14 Resistance to Chemical 15 Resistance to stain 16 Crazing Resistance 17 Resistance to Surface Abrasion 18 Scratch Hardness (Moh,s scale) 19 Impact Resistance(COR) 20 Frost Resistance 21 Lead and Cadmium Release CERAMIC TILES TECHNICAL SPECIFICATION - GROUP B IIa, ISO Standard 13006:2018 & IS 15622 :2017 • Colours in the catalogue are as accurate as printing process allows. please check actual tile sample before making the nal selections. • Sizes mentioned in the catalogue are nominal sizes only. • No claim will be entertained once the tiles are xed. • For better laying, please follow the instructions on the packaging box. • Please make sure to check the shade/nish with the sales agent/ dealer before making the nal purchase because there might be variation in actual nish that shown in the catalogue. The company will not bear any loss in such case. 300X600 MM (HD MATT) 300X600 MM (HD POLISHED) 300X600 MM (STONE KRAFT) WALL & FLOOR TILES 241
RkJQdWJsaXNoZXIy MTQ1NTA=