WALL & FLOOR TILES 300X600 MM (DIGITAL) 300X600 MM (IMPRESSIONS) 300X450 MM (DIGITAL) 300X300 MM (DIGITAL) 150X600 MM (NORMAL & DIGITAL) 8.80 8.80 7.90 7.80 8.40 5 5 6 10 8 0.900 0.900 0.810 0.900 0.720 14.78 14.78 13.53 13.33 15.00 240 Max. ± 0.20% Max. ± 5.0% Max. ± 0.20% Max. ± 5.0% Max. ± 0.15% Max. ± 0.20% Max. ± 0.30% Max. ± 0.30% Min 95% free from visible defects Average ≥ 10 % 0.01 mm/m Max ≤9X10¯6 K¯1 10 Cycle Min ≥ 650 N ≥ 17 N/mm² Min Class AA Min Class 1 Min. 4 cycles @ 7.5 bar Min Class - II Min 3 0.68 Min 100 Cycle Passed Cd - <1 ppm , Pb - 48 ppm Max. ± 0.15% Max. ± 0.20% Max. ± 0.30% Max. ± 0.30% Min 95% free from visible defects Average ≥ 10 % 0.04 mm/m Max ≤9X10¯6 K¯1 10 Cycle Min ≥ 600 N Min Class AA Min Class 1 Min. 4 cycles @ 7.5 bar Min Class - II Min 3 0.55 Min NA NA ISO 10545-2/ IS 13630 Part 1 ISO 10545-2 / IS 13630 Part 1 ISO 10545-2 / IS 13630 Part 1 ISO 10545-2 / IS 13630 Part 1 ISO 10545-2/ IS 13630 Part 1 ISO 10545-2 / IS 13630 Part 1 ISO 10545-2 / IS 13630 Part 1 ISO 10545- 3 / IS 13630 Part 2 ISO 10545-10 / IS 13630 Part 3 ISO 10545-8 / IS 13630 Part 4 ISO 10545-9/ IS 13630 Part 5 ISO 10545-4/IS 13630 Part 6 ISO 10545-4 / IS 13630 Part 6 ISO 10545- 13 /IS 13630 Part 8 ISO 10545-14 / IS 13630 Part 8 ISO 10545-11 / IS 13630 Part 9 ISO 10545-7 / IS 13630 Part 11 IS 13630 Part 13 ISO 10545-5 / IS 13630 Part 14 ISO 10545-12/ IS 13630 Part 10 ISO 10545-15 Max. ±0.30% Max. ± 10.0% Max. ±0.30% Max. ±0.30% Max. ± 0.40% Max. ± 0.40% Min 95% free from visible defects Average ≥ 10 % Test Method Available Test Method Available Test Method Available ≥ 600 N 2 ≥ 12. N/mm 2 ≥ 12 N/mm Min Class B Min Class 3 Required Report Abrasion Class And cycle passed NA Test Method Available Test Method Available Test Method Available Standard Test Method ISO Standard 13006:2018 S.No. IS 15622 :2017 Kajaria Standard 1 Deviation in length & Width Test Description 2 Deviation in Thickness Deviation in Straightness of Sides 3 4 Deviation in Rectangularity 5 Surface Flatness (Center& Edge curvature) 6 Warpage 7 Surface Quality 8 Water Absorption 9 Moisture Expansion 10 Linear Termal Expansion 11 Thermal Shock Resistance 12 Breaking Strength 13 Modulus of Rupture 14 Resistance to Chemical 15 Resistance to stain 16 Crazing Resistance 17 Resistance to Surface Abrasion 18 Scratch Hardness (Moh,s scale) 19 Impact Resistance(COR) 20 Frost Resistance 21 Lead and Cadmium Release DIGITAL WALL TILES TECHNICAL SPECIFICATION GROUP- B III , ISO Standard 13006:2018 & IS 15622 :2017
RkJQdWJsaXNoZXIy MTQ1NTA=